Connecting A Usb Device With Usb Port - NEC MultiSync P484 User Manual

Connecting a USB device with USB port

USB1: USB downstream port (Type-A).
Connect a USB compatible fl ash memory or keyboard to Down Stream Port.
USB2: USB upstream port (Type-B).
Connect to a USB compatible computer with a USB cable.
A USB compatible computer connected to USB2 can control the devices connected to USB1.
USB CM1 (2A): Power supply port.
Please refer to the specifi cations page for power supply information (see pages 65, 66, 67, 68, 69 and 70).
USB CM2: Service port.
Please do not connect devices.
USB MP: USB downstream port (Type-A).
To use Media player function, please use this port.
• Please make sure about the connector shape and orientation when connecting the USB cable.
• Depending on the use of computer BIOS, OS or device, the USB function may not be working. In this case, please check
user's manual of your computer or device, or contact your supplier for detailed information.
• Before turning off the main power switch of the monitor or shutting down Windows
remove the USB cable from the monitor. You may lose data when the computer crashes.
• It may take a few seconds until the monitor recognizes the USB input. Do not disconnect the USB cable or disconnect and
reconnect the USB cable before the monitor recognizes the input.
• You can set power supply for USB CM1 (2A) at USB POWER in the OSD menu (see page 43).
• Please use a USB cable which supports 2A to USB CM1 (2A).
• Please refer to the USB in the OSD menu (See page 43) for the USB setting.
NOTE: USB CM1 (2A) and USB CM2 are not corresponding port.
Please refer to the connection (See page 16) to connect USB devices to the monitor.
English-18
® , please turn off the USB function and