Connecting A Personal Computer; Connecting A Player Or Computer With Hdmi; Connecting A Computer With Displayport; Connecting A Usb Device With Usb Port - NEC MultiSync C431 User Manual

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to reproduce your computer's video signal output.
Some display cards may not be able to support the required resolution for proper image reproduction.
Your LCD monitor shows proper image by adjusting the factory preset timing signal automatically.
<Typical factory preset signal timing>
Scanning frequency
Resolution
Horizontal
640 x 480 31.5 kHz
800 x 600 37.9 kHz
1024 x 768 48.4 kHz
1280 x 720 45.0 kHz
1280 x 768 47.8 kHz
1280 x 800 49.7 kHz
1280 x 960 60.0 kHz
1280 x 1024 64 kHz
1360 x 768 47.7 kHz
1366 x 768 47.7 kHz
1400 x 1050 65.3 kHz
1440 x 900 55.9 kHz
1600 x 1200 75.0 kHz
1680 x 1050 65.3 kHz
1920 x 1080 67.5 kHz
1920 x 1200 74.6 kHz
• If you use with an Apple Macintosh
Refer to your Apple Macintosh
requirements, and any special identifi cation or confi guration your monitor's image and monitor may require.

Connecting a Player or Computer with HDMI

• Please use a HDMI cable with the HDMI logo.
• It may take a moment for the signal to appear.
• Some display cards or drivers may not display an image correctly.
• When you use a computer with HDMI, please set OVER SCAN to "AUTO" or "OFF" (see page 29).
• Please check display card when image is compressed with 1920 x 1080.
• To output HDMI audio, set [HDMI1], [HDMI2] or [HDMI3] at AUDIO INPUT in the OSD or choose [HDMI1], [HDMI2] or
[HDMI3] by the remote control AUDIO INPUT button.
• If the monitor's main power is turned on after a connected computer is turned on, sometimes images are not displayed.
In this case, please turn off the computer then turn it on again.

Connecting a Computer with DisplayPort

• Please use a DisplayPort cable with the DisplayPort compliance logo.
• It may take a moment for the signal to appear.
• When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear.
• Select DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.
• To output DisplayPort audio, set [DisplayPort] at AUDIO INPUT in the OSD or choose [DisplayPort] by the remote control
AUDIO INPUT button.
• If the monitor's main power is turned on after a connected computer is turned on, sometimes images are not displayed.
In this case, please turn off the computer then turn it on again.

Connecting a USB device with USB port

USB (2A): USB downstream port (Type-A).
To use the Media Player function, please use this port.
• Please make sure the connector shape and orientation is correctly aligned when connecting the USB device or cable.
• Please refer to the specifi cations page for power supply information (see pages 54, 55 and 56).
• When you use the USB (2A) port for power supply, please use a USB cable that supports 2A.
• Do not bind the USB cable. It may cause heat or fi re.
VGA HDMI
Vertical
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz No Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
60 Hz Yes Yes
® series computer, set "Mirroring" to "off" on your device.
®
series computer user's manual for more information about your computer's video output
DisplayPort
Remarks
1.1a
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes Compressed image
Yes
Yes Recommended resolution
Yes Compressed image
English-16