NEC MultiSync PA271Q User Manual page 13

7. Connect the power cord to a power outlet.
NOTE: Please refer to the Caution section of this manual for proper selection of the AC power cord (see
8. Turn on the monitor by touching the power key and then the computer (Figure E.1).
NOTE: If you have any problems please refer to the Troubleshooting section of this User's Manual (see
Adjustable stand with pivot capability
Raise and Lower: Hold the monitor on each side and lift or lower to the desired height.
Tilt and Swivel: Hold the top and bottom sides of the monitor screen with your hands and adjust the tilt and swivel as desired.
Screen Rotation (Pivot): Hold the monitor on each side and turn it from landscape to portrait.
To rotate the OSD menu between landscape and portrait, refer to the OSD (On-Screen-Display) Controls section (see
Rotation, Raise and Lower
CAUTION: Handle with care when adjusting the monitor screen. Do not apply pressure to the LCD when adjusting the
monitor screen height.
Before rotating, disconnect the power cord and all cables from the display. The screen must be raised to the
highest level and tilt to avoid knocking the screen on the desk or pinching your fingers.
Power key
Figure E.1
English-11
page 1).
page 30).
Tilt and Swivel
page 16).