Controlling The Lcd Monitor Via Lan - NEC MultiSync PA271Q User Manual

Controlling the LCD monitor via LAN

LAN Control Function
Provides control of the monitor settings over the network, via a custom application or a web browser on a connected computer
or smartphone.
Example of LAN connection:
Server
Hub
LAN cable
(not supplied)
NOTE: Use a category 5 or higher LAN cable.
Preparation Before Use
Connect the monitor to the network by using a commercially available LAN cable.
Set the IP address (see page 21).
Using Control Software
Control software allows you to control the monitor settings and get the monitor status, including calibration information.
Please download the software from our web page and install it on your computer.
OSD control via web browser (HTTP server function)
You can switch the picture modes and video inputs via a web browser.
To access this function, enter the monitor's URL in the web browser on a connected smartphone or computer.
http://<the monitor's IP address>/index.html
You can control the OSD menu using the web browser instead of the touch keys on the monitor. By using the "Hot key" setting in
the OSD, you can customize the functions.
English-23