Troubleshooting - Paramount Fitness KLD7001S Instruction Manual

TROUBLESHOOTING

PROBLEM
Pilot will not light
Pilot will not stay on
Burner will not light
Bu low
Bu goe iately
after ignition
Emitter glows uneven
Thick black smo ke
Carbon build up
PROBABLE CAUSE
Gas valve may be OFF
Fuel tank is empty
Air in supply system
Loose connection
Debris around pilot
Loose connection
Thermocouple bad
Gas leak in line
Lack of fuel pressure
Pressure is low
Control Valve not ON
Thermocouple bad
Pilot light assembly bent or not in correct location
Supply hose is bent or twisted
Blockage in burner injector
Low gas pressure
Blockage in burner injector
Base is not on a level surface
Low gas pressure
Blockage in burner
Dirt lm on r ector a ame screen
SOLUTION
Turn the gas valve ON
Purge air from lines
Clean dirty area
Tighten connections
Replace thermocouple
Check connections using leak test
Fuel tank is near empty
Fuel tank is near empty
Remove, clean and replace
Turn valve ON
Replace thermocouple
Place pilot light in correct position and retry
Straigten hose and perform leak test on hose
Clean or replace burner injector
variable knob to LO
Clean or replace burner injector
Place heater on level surface
Replace cylinder with a new cylinder
Tu
and clear burner inside and out
Clea
-16-
for 10 minutes before setting
l. Remove blockage
ctor an ame screen
-