Description; Operation; Unpacking - emitor SATLOOK Micro plus Owner's Manual

1 Description

The SATLOOK MICRO + is a Swedish made SAT-TV instrument.
The unit is made for exact alignment and adjustment of satellite-dishes. It is intended for
professional use when high accuracy and precise information are needed.
It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy
to get a hold on and takes only a few minutes to learn.
The instrument is provided with a 3" LCD which either shows Sat-signal strength or Digital
information.
The SATLOOK Micro + is unique as it can measure satellite signal from two LNBs at the same
time. Signal strength is presented graphical on the LCD-display in form of thermometer-scales.
It can also present pitchtones (the higher tone the better signal) on a loudspeaker.
SATLOOK Micro + shows Digital information like BER (bit error rate), constellation-diagram
(QPSK) and S/N (signal/noise ratio).
The NIT function can identify the various TV-satellites by reading out the NIT in the
Bitstream (NIT = Network Information Table). The NIT also contains info about the
transponders TV and Radio-channels.
SATLOOK Micro + can store 100 positions of Satellite transponder information.
The instrument can easily scan through the memory positions and identify the various Satellite
transponders.
The polarisation of the LNB is switchable 13V/18V and the Hi-Lo band with
22 kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like switches, LNB´s and
actuators).
The power of the instrument is supplied by a built in and rechargeable battery.
Even though the instrument has a lot of functions it is still very light and flexible.

2 Operation

2.1 Unpacking

Start with unpacking the instrument and check that the following items are in the cardboard
box:
1. SATLOOK Micro + instrument
2. Nylon carrying case with shoulder strap
3. Car-adaptor 12V
3(12)