Technical Specification - emitor SATLOOK Micro plus Owner's Manual

5 Technical specification

Input frequency:
Input level:
Input/output impedance:
Measuring method (Analog): - Signal presentation on LCD display in form
Measuring method (Digital): - BER (bit error rate)
Max-level:
Satellite-identification:
Memory:
Memory locks on:
Memory search:
Presentation:
PC-connection:
Power out:
22 kHz tone:
DiSEqC:
DiSEqC actuator:
Battery:
Operational:
Weight:
Accessories:
920-2150MHz.
35-100 dBuV.
75 Ohm, F-connectors.
of thermometer scales.
- Pitch-tone, highest tone on loudspeaker.
- S/N (signal/noise-ratio)
- Constellation (QPSK)
- Thermometer scales showing max.
- Maxhold function.
- BER, S/N and QPSK showing max values.
Yes, by reading out the NIT in the Bitstream.
Info about the TV and Radio channels.
100 transponders can be stored with name.
FEC, Symbol-rate Frecuency, 13/18v, 22kHz.
The instrument scans the memory positions and presents
the matching transponders.
On LCD 3"-display.
Yes, RS232-connector.
Yes, 13-18V.
Yes, on/off.
Yes, all 1.0 and 1.1. Also Toneburst on/off.
Built in positioner for DiSEqC 1.2.
Rechargable 12v, 1.8 amp/hour.
About 2 hour on a fully charged battery.
About 1.5 kg incl.battery.
Nylon carrying-case.
Power-supply of 220v/13.5v, 1.7amp.
Car-charger.
2 x F-female / F-female-adapters.
12(12)