Table of Contents
Advertisement
Emitor´s DIGIAIR Pro is developed in Sweden for exact alignment and adjustment of
terrestrial antennas. This is made for both analogue (dBuV) and digital DVB-T -
COFDM.
DIGIAIR Pro is microprocessor controlled, making it very reliable and accurate.
Signal strength is presented on the LCD-display. In analogue mode it shows a
single channel or six channels at the same time. You can also choose to view the
signal in spectrum mode.
In digital mode it displays the BER (bit error rate) and SNR (signal/noice ratio).
Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do.
Furthermore DIGIAIR Pro present pitch tones (the higher tone the stronger signal)
on a loudspeaker.
DIGIAIR Pro is very sensitive and can detect even the weakest signals.
DIGIAIR Pro can feed Voltage (0/5/12/24 Volt) to external active antennas this
feature is short-circuit protected by an automatic fuse.
DIGIAIR Pro is charged via an external DC power-source of 10 -15 volt.
The DIGIAIR PRO operates with 8xAA rechargeable batteries. The unit will work for
at least 2 hours with fully charged batteries.
Content:
DIGIAIR PRO - DESCRIPTION
2
3
3
3
3
4
5
5
5
6
6
6
7
7
7
8
8
8
8
8
9
9
9
9
10
2
- Quick Links:
- Single Channel Mode
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DIGIAIR PRO and is the answer not in the manual?