Display - Fronius Symo 3.0-3-S Operating Instructions Manual

Display areas in Display mode

Display

Power for the display comes from the mains voltage. Depending on the setting selected in
the Setup menu, the display can be kept on all day.
IMPORTANT! The display on the inverter is not a calibrated measuring device. A slight in-
accuracy in comparison with the energy meter used by the power supply company is in-
Display areas in Setup mode
trinsic to the system. A calibrated meter will be needed to calculate the bills for the power
supply company.
S t a n d b y
W i F i A c c e s s P o i n t
D A T C O M
U S B
R e l a y
(*)
(*)
(**)
(***)
1
Scroll bar
The Energy Manager symbol
is displayed when the Energy Manager function is activated
Inv. no. = Inverter DATCOM number,
Save symbol - appears briefly while set values are being saved,
USB connection - appears if a USB flash drive has been connected
Menu item
Parameter declaration
Display of values, units and status codes
Function key functions
Energy-Manager (**)
Inv. no. | Save symbol | USB conn.(***)
Menu item
Previous menu items
Currently selected menu item
Next menu items
Function key functions
25