Heart Rate Feature - Spirit CT900ENT Owner's Manual

HEART RATE FEATURE

The pulse (Heart Rate) on the screen shows the current value of the heart beats per minute. You must use
both left and right stainless steel sensors to pick up your pulse. Pulse values are displayed anytime the
computer is receiving a Grip pulse signal. You may use the Grip pulse feature while in Heart Rate Control.
The CT900ENT will also pick up wireless heart rate transmitters that are Polar compatible.
TO TURN TREADMILL OFF:
The screen will automatically turn off (go to sleep) after 30 minutes of inactivity. This function is called sleep
mode. In sleep mode, the treadmill will power down most everything except for a minimum of circuitry
for detecting button presses and the safety key so it will start up again if these are activated. There is only
a tiny amount of current used in sleep mode (about the same as your TV when it is turned off) and it is
perfectly fine to leave the main power switch on in sleep mode. Of course you may also remove the safety
key or turn off the main power switch to power down the treadmill.
29
www.spiritfitness.com