Spirit CT900ENT Owner's Manual page 10

CT900ENT
7
6 5
79
8
STEP ONE
8
79
6 5
Spirit Fitness
HARDWARE FOR STEP 1
PART TYPE
65 BOLT
79 LOCK WASHER
1. Loosen the 8 screws holding the motor cover in
place and remove the cover.
2. Uncoil wiring harness and run wires through the
RIGHT UPRIGHT (7).
3. Use 5 BOLTS (65) and 5 LOCK WASHERS (79)
to attach the RIGHT UPRIGHT (7) to the MAIN
FRAME (1). Do not pinch wires. Do not tighten
before putting the console on.
4. Use 5 BOLTS (65) and 5 LOCK WASHERS (79)
to attach the LEFT UPRIGHT (8) to the MAIN
FRAME (1). Do not tighten before putting the
console on.
DESCRIPTION QTY
M10x1.5x60mm 10
10 10