Teledyne Falcon4 86M User Manual page 55

Output Line Pulse
Duration (in Us)
Output Line Value
Active
Inactive
Line Detection Level
2.4V Threshold
Threshold_6_0
Threshold_12_0
Line Status All
Output Line Software
Latch Control
Off
Latch
Falcon4 86M Cameras
outputLinePulseDuration
outputLineValue
Active
Inactive
lineDetectionLevel
Threshold_2_4
Threshold_6_0
Threshold_12_0
LineStatusAll
outputLineSoftwareLatchContro
l
Off
Latch
Sets the duration of the output pulse (RW)
1 to100, 000 µs
Note: LineMode feature must be set to Output
and outputLineSource is not equal to Off or
SoftwareControlled.
Selects the state of the output on the selected
line. (RW) The Value will be applied
immediately if the
outputLineSoftwareLatchControl feature is
equal to OFF.
The Value will be applied when the
outputLineSoftwareCmd feature is set if the
outputLineSoftwareLatchControl feature is
equal to LATCH.
Note: LineMode feature must be set to Output
and outputLineSource set to
SoftwareControlled.
Sets the Output circuit to close.
Inactive - Sets the Output circuit to open.
The voltage at which the signal is treated as a
logical high. Available when the Line selector is
set to a general purpose input (GPI). (RW)
Note: This value is for both general purpose
inputs (i.e. setting this value sets it for both
Line 1 and Line 2).
2.4V threshold: for TTL inputs
6V threshold: for 12V input
12V threshold: for 24V input
Returns the current status of all available line
signals, at time of polling, in a single bitfield.
This is a polled feature that requires the host to
poll the camera for the latest value. <RO>
The order is Line1(LSB), Line2, Line3, Line4/
7 6 5 4 3
Not used Line
4
The software latch allows the user to set more
than 1 output simultaneously(RW)
OutputLine that are currently in Software Latch
control will only set with the value in
OutputLineValue with the
outputLineSoftwareCmd feature.
Changes to the output line value are applied
immediately.
Changes to the output line value are applied
when the Output Line Software Command is
triggered.
2 1 0
Line Line Line
3 2 1(LSB)
Contents  53
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
Beginner
DFNC
Beginner