Sony NW-ZX2 Manual page 92

Hint
[68] How to Use
Turning the Bluetooth function on/off
To connect Bluetooth audio devices with your Walkman, you first have to turn on the
Bluetooth function.
Depending on the device, the procedure to establish connection may vary. Refer to
the operating instructions of the Bluetooth audio device.
1. Swipe the status bar down and tap
Do you need professional PDFs? Try PDFmyURL!
Touch the devices together again to disconnect.
Take the following measures if the connection is poor.
Slowly move your Walkman over the mark of the Bluetooth audio device (
If your Walkman is in a case, remove the case.
To turn off the NFC function, swipe the status bar down, tap
[More] - [NFC] and remove the check mark.
Bluetooth Making a Bluetooth Connection from the Menu
- [BLUETOOTH] or
).
- [SETTINGS] -
[BLUETOOTH