Sony NW-ZX2 Manual page 106

If your Wi-Fi router does not support WPS (Wi-Fi Protected Setup), turn on the Wi-Fi
function, and then make a Wi-Fi connection by selecting a network from the list of
available networks.
1. Swipe the status bar down and tap
2. Tap the network you want to use from the list.
3. Enter a password, if needed, and tap [Connect].
Hint
Note
[83] How to Use
Do you need professional PDFs? Try PDFmyURL!
Make sure the Wi-Fi function is on. If not, turn on the Wi-Fi function.
If the network SSID of the access point that you want to use is not shown in the
network list, add the network manually.
If you are connecting to a Wi-Fi network for the first time, select a method for
setting up a Wi-Fi connection.
When you are in range and the Wi-Fi function is on, your Walkman will
automatically reconnect to a network to which you have connected before.
To check the MAC address of your Walkman or other Wi-Fi details, swipe the
status bar down and tap
Please contact the manufacturer of your Wi-Fi device for information such as how
to set the access point.
Wi-Fi (Wireless LAN)
- [WI-FI].
- [WI-FI] - - [Advanced].
Connecting to a Wi-Fi Network