Sony NW-ZX2 Quick Start Manual

Quick Start Guide
NW-ZX2
About the manuals
To see the detailed information about WALKMAN®,
access to Help Guide on the internet.
http://rd1.sony.net/help/dmp/nwzx2/h_ww/
While browsing is free, you may be charged a communication fee according to your
carrier contract.
Regarding the basic operations, the customer support website URL and
Important Information, refer to "How to Install and Read the Help Guide"
section on this manual.
Contents
Please check the items in the package.
Walkman (1)
USB cable (1)
Leather Carrying Case (1)
Spacer (1)
Quick Start Guide (this manual)
Headphones and microSD Card are not supplied with your Walkman.
About the genuine leather carrying
case
This product is made of genuine leather. Unlike artificial leather, genuine
leather may have scratches, wrinkles, or vein marks on the surface. Every
case has a unique appearance and color.
Wrapping the headphone cord around the leather carrying case when
storing may leave headphone cord marks as the leather is soft.
When using cleaner, read the instructions carefully and try it on an
inconspicuous part first.
Do not use any type of solvents such as alcohol or thinner for cleaning.
Doing so will cause color fading, deformation or degradation which may
damage the leather carrying case.
Moisture such as rain or sweat, or friction may cause discoloration or color
migration to your clothes, etc.
Do not use or store the leather carrying case in a location exposed to direct
sunlight (such as in a car), extremely high/low temperatures, high humidity
or dust.
Be careful that your Walkman does not come in contact with the snap
button of the leather carrying case when you put the Walkman in or remove
it from the case. Otherwise, the Walkman may become scratched.
©2015 Sony Corporation Printed in Malaysia 4-545-608-11(1)
Parts and Controls
Screen (touch screen)
Touch (tap) icons, items, etc., on the screen to operate your Walkman.
Built-in microphone
Headphone jack
Push the headphone plug all the way in. If the headphones are
connected improperly, the sound from the headphones will be impaired.
Sound is not emitted from the headphones connected to the headphone
jack when a Bluetooth connection is active. End the Bluetooth
connection.
WM-PORT jack
Connect the USB cable (supplied) or other accessories that support
WM-PORT (not supplied).
Access lamp
The access lamp is located under the microSD card slot cover.
microSD card slot
The microSD card slot is located under the microSD card slot cover. Open
the cover before inserting a microSD card (not supplied). Insert a microSD
card until it clicks into place to increase the available memory of your
Walkman.
microSD card slot cover
Built-in antenna
Wi-Fi, Bluetooth, and GPS antennas are built-in.
(Power)/Screen lock button
Press to turn the power on. Press and hold to turn the power off. Press to
turn the screen on/off. Your Walkman will be reset if you press and hold
the button for about 8 seconds.
Volume "+" and "–" buttons
Press the volume "+" button to turn up and the volume "–" button to turn
down the volume.
There is a tactile dot beside the "+" button. Use it to help with button
operations.
(Next) button
Skip to the next song, the next chapter of a video, or a scene playing 5
minutes later. If you press and hold the button, songs or videos are
fast-forwarded.
(Play/Pause) button
Play back or pause songs or videos.
There is a tactile dot on the button. Use it to help with button operations.
(Previous) button
Skip to the previous (or current) song, the previous chapter of a video, or
a scene that played 5 minutes ago. If you press and hold the button,
songs or videos are fast-rewinded.
Strap hole
This is used to attach a strap (not supplied).
N mark
Touch a Bluetooth audio device equipped with the NFC function to this
mark.
About volume operation (Only for
countries/areas complying with
European Directives)
An alarm (beep)* and warning [Check the volume level] are meant to
protect your ears when you raise the volume setting beyond a specific
level for the first time. You can cancel the alarm and warning by tapping
[OK] on the alert dialog.
* The alarm (beep) does not sound when connecting a Bluetooth audio
device.
Note
You can turn up the volume beyond the specific level after canceling the
alarm and warning.
After the initial warning, the alarm and warning repeat for every 20
cumulative hours that the volume is set beyond the specific level; when this
happens, the volume is changed to the initial setting automatically.
If the volume is set beyond the specific level and you turn off your Walkman,
the volume returns to the specific level automatically.
Initial Settings
1
Use the supplied USB cable to connect your
Walkman to a running computer and charge
the Walkman.
Your Walkman turns on.
Note
If a large battery symbol is displayed while
you are charging your Walkman, the
remaining charge is still too low for the
Walkman to operate. The Walkman will
start automatically after being charged for
about 10 minutes.
It takes about 4.5 hours to fully charge the battery.
To prevent battery deterioration, charge the battery at least once every
six months or every year.
2
If the USB connected screen appears, tap
to quit the screen, and then proceed to the
initial settings.
The language selection screen* appears.
* Depending on where you purchased your Walkman, the language
selection screen may not appear.
3
Select the desired language to be used to
display the End User License Agreement.
4
Make sure that you understand the terms of
the license agreement then tap [Agree].
The initial setup screen appears.
5
Tap .
The screens and illustrations
shown are for reference only
and may differ from the
actual product or screen.
6
Select the desired language.
7
Tap to begin using your Walkman.
8
Set the Wi-Fi connection, Google account
and date/time, etc., following the
instructions shown on the screen.
Hint
Wi-Fi connection and Google account can also be set afterwards.
How to Install and Read the Help Guide
Install the "Help Guide" on your computer. This contains basic operations
of your Walkman, the customer support website URL, and how to
transfer content such as music to the Walkman.
1
Connect your Walkman to a running computer.
2
Make sure that [USB storage in use] is displayed on
the screen.
Hint
If [USB connected] is displayed, tap [Turn on USB storage].
3
Open the following folders and double-click the
executable file on your Walkman.
Windows 7 or earlier: [Start] – [Computer] – [WALKMAN] – [FOR_
WINDOWS] – [Help_Guide_Installer(.exe)].
Windows 8: [Start screen] – [Desktop] – [File Explorer] – [Computer]
– [WALKMAN] – [FOR_WINDOWS] – [Help_Guide_Installer(.exe)].
Windows 8.1: [Desktop] – [File Explorer] – [This PC] – [WALKMAN] –
[FOR_WINDOWS] – [Help_Guide_Installer(.exe)].
Mac: [Finder] – [WALKMAN] – [FOR_MAC] – [Help_Guide_Installer_
for_mac].
4
Follow the on-screen instructions to complete the
installation.
5
To read the Help Guide, double-click the shortcut or
the alias icon generated on your computer.