Ldap - Server Technology 4805-XLS-16B Installation And Operation Manual

LDAP

The -48 VDC products support Lightweight Directory Access Protocol (LDAP) Version 3. This support enables
authentication with LDAP servers; user accounts do not need to be individually created locally on each unit.
This allows administrators to pre-define and configure (in each product and in the LDAP server) a set of necessary
LDAP Groups, and access rights for each. A user's access rights can then be assigned or revoked simply by making
the user a member of one-or-more pre-defined LDAP groups. User accounts can be added, deleted, or changed in the
LDAP server without any changes needed on individual products.
LDAP support has been tested in the following environments:

Microsoft Active Directory (MSAD)

Novell eDirectory (eDir)

OpenLDAP
LDAP Command Summary
Command
Add GrouptoLDAP
Add OutlettoLDAP
Add PorttoLDAP
Create LDAPGroup
Delete GroupfromLDAP
Delete OutlettoLDAP
Delete PortfromLDAP
List LDAPGroup
List LDAPGroups
Ping
Remove LDAPGroup
Set Authorder
Set DNS
Set LDAP Bind
Set LDAP BindDN
Set LDAP BindPW
Set LDAP GroupAttr
Set LDAP GroupType
Set LDAP Host
Set LDAP Port
Set LDAP UserBaseDN
Set LDAP UserFilter
Set LDAP UseTLS
Set LDAP
Set LDAPGroup Access
Set LDAPGroup Envmon
Show LDAP
Show Network
-48 VDC Remote Power Manager
Installation and Operations Manual
Description
Grants an LDAP group access to one or more groups
Grants an LDAP group access to one or more outlets
Grants an LDAP group access to one or more serial ports
Adds an LDAP group name
Removes access to one or more groups for an LDAP group
Removes access to one or more outlets for an LDAP group
Removes access to one or more serial ports for an LDAP group
Displays all accessible outlet/groups/ports for an LDAP group
Displays privilege levels for all LDAP groups
Verifies proper DNS configuration by name resolution
Deletes an LDAP group name
Specifies the authentication order for each new session attempt
Sets the IP address of the Domain Name server
Specifies the LDAP bind request
Specifies the user account Fully-Qualified Domain Name (FQDN) for binds
Specifies the user account password for binds
Specifies the user class distinguished name (DN) or names of groups a user is a member of
Specifies the data type for the Set LDAP GroupAttr command
Sets the IP address or hostname of the Directory Services server
Sets the LDAP server port number
Sets the base distinguished name (DN) for the username search at login
Sets the filter used for the username search at login
Enables/disables LDAP over TLS/SSL support
Enables/disables LDAP support
Sets the access level for an LDAP group
Grants or removes access to environmental monitoring
Displays LDAP configurations
Displays network configuration information for all IPv4 and IPv6 settings
Advanced Operations  123