Tacacs - Server Technology 4805-XLS-16B Installation And Operation Manual

TACACS+

The Configuration > TACACS+ page allows the setup and maintenance of settings required to enable TACACS+
support.
Enabling or disabling TACACS+ support:
Select Enabled or Disabled from the TACACS+ drop-down menu and click Apply.
Setting the TACACS+ server address:
Enter the IP address or hostname in the Primary and/or Secondary Host field and click Apply.
NOTE: Both IPv4 and IPv6 formats are accepted in the Primary/Secondary Host fields.
Changing the TACACS+ server port:
Enter the port number in the Port field and click Apply.
Configuring the authentication order:
Select Remote > Local or Remote Only from the drop-down menu and click Apply.
NOTE: It is recommended not to set the authentication order to Remote Only until TACACS has been fully configured and tested.
Setting the TACACS+ encryption key:
Enter a key and verify the new key the Encryption Key and Verify Encryption Key fields. Click Apply.
For security, key characters are not displayed.
Configuring TACACS+ access levels:
Click on the TACACS+ Privilege Levels link at the bottom of the page.
Changing a TACACS+ access level:
Click on the Edit link in the Action column for the associated TACACS+ Privilege Level.
On the subsequent TACACS+ Privilege Level - Edit page, select Admin, User, On-only, View-only, Reboot-only,
Power User from the Access Level drop-down menu and click Apply.
Granting or removing environmental monitoring viewing:
Click on the Edit link in the Action column for the associated TACACS+ access level.
On the subsequent TACACS+ Privilege Level - Edit page, select Yes or No from the Environmental Monitoring drop-
down menu and click Apply.
NOTE: Granting access to environmental monitoring (temperature/humidity/sensors) to a non-admin user also grants that user access to
power monitoring (outlets, infeeds, towers – all the environmental data of the CDU).
-48 VDC Remote Power Manager
Installation and Operations Manual
Operations  57