Server Technology 4805-XLS-16B Installation And Operation Manual page 81

Setting the tower AC voltage type:
The Set Tower 3phase command sets the product input AC voltage type.
NOTE: If set at the factory, you cannot edit the voltage type.
To set the tower AC voltage type:
At the Switched -48 VDC: prompt, type set tower 3phase, followed by the absolute tower name and yes or no. Press
Enter.
Example
The following command sets the AC voltage type for tower .A to non-3-phase:
Switched -48 VDC: set tower 3phase.a no<Enter>
Displaying tower information:
The Show Towers command displays information about the CDU. This information includes the absolute and
descriptive CDU names, serial and model numbers, and voltage types.
To display tower information:
At the Switched -48 VDC: prompt, type show towers and press Enter.
Example
Switched -48 VDC: show towers<Enter>
Tower ID:
Name:
Product S/N:
Model No.:
Power Type:
3-Phase:
More (Y/es N/o):
-48 VDC Remote Power Manager
Installation and Operations Manual
.A
TowerA
AA06F011157
CW-8H1-C20
DC
No
Operations  81