Bottom Speakers - HP ENVY x360 13 Maintenance And Service Manual

Bottom speakers

Description
Bottom speakers (include cables)
Before removing the bottom speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the bottom speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable from the two clips in the computer (2).
3. Remove the four Phillips M2.0×2.0 screws (3) that secure the speaker assembly to the computer.
4. Remove the cable that connects the speakers from the two clips on the bottom of the battery (4).
5. Remove the speakers (5).
Reverse this procedure to install the bottom speakers.
38 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 27).
25).
Spare part number
L19602-001