Solid-State Drive - HP ENVY x360 13 Maintenance And Service Manual

Solid-state drive

Description
1-TB, PCIe, TLC
512-GB, PCIe, TLC
512-GB, PCIe, value
256-GB, PCIe, TLC
256-GB, PCIe, value
128-GB, SATA-3, TLC
Solid-state drive Mylar shield
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the solid-state drive module:
1. Remove the Mylar shield from on top of the module (1).
NOTE:
2. Remove the Phillips M2.0×3.0 screw (2) that secures the module to the computer.
30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
The Mylar shield is available in the Foil Kit, spare part number L19790-001.
25).
27).
Spare part number
L19583-001
L19582-001
L19585-001
L19580-001
L19584-001
L19579-001
L19790-001 (Foil Kit)