Table of Contents
Advertisement
5.
When installing a battery, be sure to install the insulators on the top and bottom of the battery as shown
in the following illustration.
To install the battery, reverse the removal procedures.
Bottom speakers
To remove the bottom speakers, use this procedure and illustration.
Table 5-8
Bottom speakers description and part number
Description
Speakers (includes all speakers)
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the bottom speakers:
1.
Disconnect both speaker cables from the system board (1).
2.
Remove the three Phillips M2.0 × 3.0 screws (2) from each speaker.
3.
Remove the speaker cable from the two Mylar tabs that secure it (3).
NOTE:
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
To avoid tearing the tabs, gently pull up on the tabs when releasing the cable.
Preparation for disassembly on page
33).
42).
Spare part number
N22946-001
33).
Advertisement
Table of Contents
