Web Settings Screen - Panasonic CZ256ESMC2 Operation Manual

3-10. WEB Settings Screen

When you use the menu to select [6. Auxiliary settings" : 10. WEB settings] while logged in as an
administrator, a screen such as shown below appears.
For details on the settings, refer to the operation manual for the Intelligent Controller.
Input values have the following restrictions.
Setting Item
Site name
IP address（each block）
Subnet mask
Default Gateway
DNS (Primary, Secondary)
WINS (Primary, Secondary)
Device Name
Sender's SMTP
Sender's account
Recipient account 1 to 3
"Cancel"/"Send" buttons
Input Range
Up to 40 characters
Numbers 0 to 255
Numbers 0 to 255
Alphanumeric
characters, "–", and "_"
Up to 15 characters
Up to 40 alphanumeric
characters and
symbols
14
Screen Display and Operation
Input Character Limitations
One-byte "=" is prohibited
"0.0.0.0" and "255.255.255.255" are
prohibited
"0.0.0.0" is prohibited
First character must be alphabetic
character.
"-" and "_" are prohibited as ending
characters
Symbols are "@" "." "_" ":" only
"=" is prohibited
To [3.10.1. Server
details] screen