Download Print this page

FLIR DBV533TL Quick Start Manual

900 tvl outdoor ir dome camera

Advertisement

Quick Links

Contents
Outdoor IR Dome Camera
Mounting screws x 4
Drywall anchors x 4
1 x Allen key
WARNING
- A REGULATED UL / CSA APPROVED 12V DC power
supply is REQUIRED for use with this camera. Use of a non-regulated,
non-conforming power supply can damage this product and voids the
warranty.
Features
• 1/3" Sony Exmor™ Megapixel sensor with 960H DSP
• Outstanding image clarity in low light conditions
• Advanced 3D Digital Noise Reduction (3D-DNR)
• 90ft (27m) Smart IR Night Vision
• 3.6mm wide angle lens
• IP66 Weatherproof rating
• 3-Axis design for Wall/Ceiling mounting
• 12V DC operation
* IR Illumination range under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on
the camera application
** Not recommended for submersion in water

Safety Precautions

• Use an appropriate low voltage power cable to prevent
fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user serviceable parts inside the camera.
Please do not disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning
material. Please use a soft cloth to clean the lens cover.
IT'S ALL ON THE WEB!
Product Information
Specification Sheets
Quick Start Guides
User Manuals
Latest News
Video Tutorials & Demos
VISIT
www.flirsecurity.com/pro
FLIR Systems Inc.
Copyright © 2014
As our products are subject to continuous improvement, FLIR Systems
Inc. reserves the right to modify product design, specifications and
prices, without notice and without incurring any obligation. E&OE
900 TVL OUTDOOR
IR DOME CAMERA
MODEL: DBV533TL

QUICK START GUIDE

English Version 1.0
www.flirsecurity.com/pro

Advertisement

loading

Summary of Contents for FLIR DBV533TL

  • Page 1: Quick Start Guide

    Copyright © 2014 www.flirsecurity.com/pro Please do not disassemble the camera. As our products are subject to continuous improvement, FLIR Systems • Do not clean the lens cover with an abrasive cleaning Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation.
  • Page 2: Installing The Camera

    Installing the Camera Installing the Camera (Continued) Camera Specifications 8. Use the included Allen key to tighten the screw on ATTENTION - Test the camera prior to selecting a permanent Image Sensor 1/3” Sony Exmor™ Megapixel CMOS mounting location by temporarily connecting the camera(s) and the dome cover.