Step 2: Pairing Power Optimizers To The Inverter - SolarEdge StorEdge Installation Manual

Hide thumbs Also See for StorEdge:

Table of Contents

Step 2: Pairing Power Optimizers to the Inverter

Once all connections are made, all the power optimizers must be logically paired to their inverter. The

power optimizers do not start producing power until they are paired with an inverter . This step

describes how to assign each inverter to the power optimizers from which it will produce power.

Perform this step when the modules are exposed to sunlight. If the string length is changed or a power

optimizer is replaced, repeat the pairing process.

1. Perform pairing: Press and hold down the inverter LCD button for about 10 seconds. The following

message is displayed:

K e e p

f o r

p a i r i n g ,

t o

e n t e r

R e m a i n i n g :

Keep holding for 5 seconds until the following is displayed:

P a i r i n g

T u r n

2. Turn the inverter ON/OFF switch to ON within 5 seconds. If you wait longer than 5 seconds the

inverter exits the pairing mode. The following message is displayed indicating that the inverter is

performing the pairing:

P a i r i n g

R e m a i n i n g

h o l d i n g

b u t t o n

r e l e a s e

m e n u . . .

s e c

S w i t c h

T o

O n

[ s e c ] : 1 8 0

SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0

Table of Contents