Dip Switch Setup According To System Application - SolarEdge StorEdge Installation Manual

DIP Switch Setup according to System Application
DIP Switch Setup according to System Application
Verify that the DIP switches on the StorEdge Connection Unit are set as described in the following table,
according to the components used in the system:
System components
Auto-transformer with connected over-temperature sensor
No auto-transformer, or auto-transformer with over-
temperature sensor not connected
38
Figure 25: StorEdge Connection Unit DIP switches
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0
Left DIP switch Right DIP switch
(SW1) setup
Up (ON) - default Down (OFF) - default
Up (ON) - default
(SW2) setup
Up (ON)