・Take out the two screws (#617).
Take out the two screws (#617).
・Remove the bottom plate unit (#B67).
Remove the bottom plate unit (#B67).
・Remove the GND plate (#140).
Remove the GND plate (#140).
Screw (#617) ×2
Power drive PCB unit
・Take out the three screws (ROHS) (#609).
Take out the three screws (ROHS) (#609).
・Remove the OP-FPC unit (#B1016).
Remove the OP-FPC unit (#B1016).
Screw (ROHS) (#609)
・Unsolder the wires (red/black/orange).
Unsolder the wires (red/black/orange).
・Remove the three solder bridges. .
・Take out the two screws (#683).
Take out the two screws (#683).
Bottom plate unit (#B67)
GND plate (#140)
OP-FPC unit (#B1016)
- D46 ・ D90 -
INC
VBA23001-R.3762 .A
Screw (#683) × 2