Dg Shield Plate; Speaker Unit - Nikon VBA23001 Repair Manual

DG shield plate

・Mount the shield plate (#78) and the shield plate unit (#B79) carefully not to damage the clip. Mount the shield plate (#78) and the shield plate unit (#B79) carefully not to damage the clip.
・Tighten the six screws (#683). Tighten the six screws (#683).
・Connect the FPC of the DG-PCB unit. Connect the FPC of the DG-PCB unit.
Shield plate (#78)

Speaker unit

・Mount the speaker unit (#B45), and tighten the two screws (#612). Mount the speaker unit (#B45), and tighten the two screws (#612).
Screw ×1 (#683)
- A78 ･ D90 -
VBA23001-R.3762.A
Screw ×5 (#683)
Shield plate unit (#B79)
Speaker unit (#B45)
INC
Screw ×2 (#612)