Rear Body; Sb/If Pcb; Dc/Dc Pcb - Nikon VBA23001 Repair Manual

5. Rear body

SB/IF PCB

・Unsolder the wires (Red/Black/Orange). Unsolder the wires (Red/Black/Orange).
・Take out the two screws (#612). Take out the two screws (#612).
・Remove the SB/IF PCB unit (#B1041). Remove the SB/IF PCB unit (#B1041).
SB/IF PCB unit (#B1041)

DC/DC PCB

・Take out the two screws (#683). Take out the two screws (#683).
・Remove the GND plate unit (#B109). Remove the GND plate unit (#B109).
Screw (#683) × 2
Wire × 3 (Red/Black/Orange)
Screw (#612) × 2
- D42 ･ D90 -
INC
VBA23001-R.3762 .A
GND plate unit (#B109)