DG PCB unit
・Disconnect the three FPCs and two harnesses.
Disconnect the three FPCs and two harnesses.
・Take out the two screws (#683).
Take out the two screws (#683).
Screw (#683)×1
・Remove the DG-PCB unit (#B1031).
Remove the DG-PCB unit (#B1031).
・Disconnect the wire of the microphone.
Disconnect the wire of the microphone.
Screw (#683)
DG PCB unit (#B1031)
- D13 ・ D90 -
INC
VBA23001-R.3762 .A