Image Sensor Unit - Nikon VBA23001 Repair Manual

Image sensor unit

・Position the image sensor unit (#B1051) in the direction of the red arrow, and mount them. Then, tighten the three image sensor unit (#B1051) in the direction of the red arrow, and mount them. Then, tighten the three
screws (#680) in numeric order.
Caution: Some bodies have lumirror sheets (#62) and washers (#63) already attached. (ref. Page A46)
(#62)
・Solder the wires (Red/Black/Orange/Gray). Solder the wires (Red/Black/Orange/Gray).
Changed page △×１
(#62) and washers (#63) already attached. (ref. Page A46) (#63) already attached. (ref. Page A46) (#63) already attached. (ref. Page A46)
Image sensor unit (#B1051)
(#63)
②
Direction for positioning
- A76 ･ D90 -
A73 △（Revision）
INC
VBA23001-R.3762.A
46)
Screw ×3 (#680)
①
③
Wire ×4 (Red/Black/Orange/Gray)
October. 2. 2008