A/M cover plat
A/M cover plate △(Revision)
・Remove the A/M cover plate (black) (#124) (carefully NOT to damage it).
Remove the A/M cover plate (black) (#124) (carefully NOT to damage it).
・Take out the screw (#659), and remove the A/M select lever (#121).
Take out the screw (#659), and remove the A/M select lever (#121).
A/M cover plate (black) (#124)
SB pop-up
・ Cut the lumirror sheet, etc, into a below-size piece. Then, insert it into the gap of the top cover pop-up section as
below, and slide it in the direction of the arrow to raise the speedlight.
Changed page △×1
A/M select lever (#121)
- D15 ・ D90 -
INC
VBA23001-R.3762 .A
Screw (#659)
2cm
4cm
October. 2. 2008