A/M Change Sw - Nikon VBA23001 Repair Manual

A/M change SW

・Mount the A/M change SW unit (#B125) on the front body. Mount the A/M change SW unit (#B125) on the front body.
・Attach the A/M change SW B (#126). Attach the A/M change SW B (#126).
・Tighten the screw (#642). Tighten the screw (#642).
A/M change SW B (#126)
・Attach the A/M setting spring (#123) with screw (#607). Attach the A/M setting spring (#123) with screw (#607).
・Pass the FPC of the lens contact unit (#B2113) through inside of the front body (#B22) as below. lens contact unit (#B2113) through inside of the front body (#B22) as below.
・Tighten the two screws (#642) in numeric order ( ①→② ). Tighten the two screws (#642) in numeric order ( ①→② ).
Pass through inside.
A/M change SW unit (#B125)
Screw (#607)
A/M setting spring (#123)
Lens contact unit (#B2113)
- A7 ･ D90 -
INC
VBA23001-R.3762.A
Screw (#642)
②
Screw (#642) ×2
①