Tempo Slider; Shift Button - Pioneer DDJ-400 Operating Instructions Manual

Cancels the loop playback.
[SHIFT] + press:
Switches the active/inactive status of the loop saved in a track.
(Active loop)
! During playback, the loop closest to the playback position saved
in the track is activated.
! When calling out a loop stored in the track, the called out loop
status changes to active or inactive.
5 OUT button
Press:
Sets the Loop Out point, and loop playback begins.
Press during loop playback:
Adjusts the Loop Out point with the jog wheel.
6 IN/4BEAT button
Press:
Sets the Loop In point.
Press during loop playback:
Adjusts the Loop In point with the jog wheel.
Press and hold for a second or more:
Turns on the auto 4-beats loop.
7 Jog wheel
Turn top when the VINYL mode is on:
Enables the scratch operation.
Turn outer section, or turn top when the VINYL mode is off:
Enables the pitch bend operation (adjustment of the playing speed).
! You can turn the VINYL mode on and off with shortcut keys of
rekordbox dj.
[SHIFT] + press:
Moves the playback position with a high speed in the direction in
which the jog wheel is turned.
8 HOT CUE mode button
Press:
Sets pads to the hot cue mode.
 "Using hot cues" (p.14)
[SHIFT] + press:
Sets pads to the keyboard mode.
 "Using keyboard mode" (p.16)
9 BEAT LOOP mode button
Press:
Sets pads to the beat loop mode.
 "Using beat loop" (p.15)
[SHIFT] + press:
Sets pads to the pad FX mode 1.
 "Using the pad FX" (p.16)
a BEAT JUMP mode button
Press:
Sets pads to the beat jump mode.
 "Using beat jump" (p.15)
[SHIFT] + press:
Sets pads to the pad FX mode 2.
 "Using the pad FX" (p.16)
b SAMPLER mode button
Press:
Sets pads to the sampler mode.
 "Using the sampler function" (p.15)
[SHIFT] + press:
Sets pads to the key shift mode.
 "Using the key shift function" (p.17)
c TEMPO slider
Adjusts the track playing speed.
d Performance pads
Various performances are possible using the performance pads.
 "Using the performance pads" (p.14)
e PLAY/PAUSE f button
Plays/pauses a track.
f CUE button
Press:
Sets, plays and calls out cue points.
! When the button is pressed during pause, the cue point is set.
! When the button is pressed during playback, the track returns to
the cue point and pauses. (Back Cue)
! When the button is pressed and held after the track returns to the
cue point, playback continues as long as the button is pressed.
(Cue Sampler)
[SHIFT] + press:
Returns the playback position to the beginning of the track.
g SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
7
En