Download  Print this page

Mixer Section; Channel Fader - Pioneer DDJ-400 Operating Instructions Manual

Dj controller
Hide thumbs

Advertisement

Mixer section

1 TRIM knob
Adjusts the individual channel output gain.
2 MASTER LEVEL knob
Adjusts the master sound level output.
3 Headphone CUE button (MASTER)
Press:
Turns on to output the master sound from the headphones.
[SHIFT] + press:
Turns on or off to display each panel of rekordbox dj.
All panels are off
Only [FX] panel is displayed
Only [SAMPLER] panel is displayed
Only [MIXER] panel is displayed
Only the [REC] panel is displayed
4 EQ (HI, MID, LOW) knobs
Boosts or cuts frequencies for the different channels.
5 CHANNEL LEVEL indicator
Displays the sound level of the respective channels before passing
through the channel faders.
6 HEADPHONES MIXING knob
Adjusts the monitor volume of the channel for which the Headphone
[CUE] button is pressed, and the sound of the [MASTER] channel.
7 FILTER knob
Turns on the filter effect for each channel.
When the knob is set to the center position, the original sound
outputs.
Turn counterclockwise: A cut-off frequency for the low-pass filter
decreases gradually.
Turn clockwise: A cut-off frequency for the high-pass filter increases
gradually.
8 HEADPHONES LEVEL knob
Adjusts the output level from the [PHONES] output terminal.
8
En
9 Headphone [CUE] button (CH)
Press:
Turns on to output the sound of the channel for which Headphone
[CUE] button is pressed from the headphones.
[SHIFT] + press:
Sets the tempos of the respective deck by tapping the button.
(Tapping function)
a Channel fader
Adjusts the level of audio signals output in each channel.
b Crossfader
Outputs the audio signals in the channel assigned to either the left
or right of the crossfader.

Hide quick links:

Advertisement

loading