Download  Print this page

Monitoring The Sound With Headphones; Closing The System - Pioneer DDJ-400 Operating Instructions Manual

Dj controller
Hide thumbs

Advertisement

2 Press the [PLAY/PAUSE f] button to play the
track.
3 Turn the [TRIM] knob.
Adjust the [TRIM] knob so that the [CHANNEL LEVEL] indicator's orange
indicator lights at the peak level.
4 Move the channel fader to the maximum level.
5 Turn the [MASTER LEVEL] knob to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
! To adjust the volume for speakers of PC/Mac, operate speakers of
PC/Mac instead of using the [MASTER LEVEL] knob.
! If the sound is not output from the [MASTER] output terminals or
this unit is not recognized on your PC/Mac, access to the Pioneer DJ
support site, and then refer to [FAQ].
pioneerdj.com/support/
Monitoring the sound with
headphones
This section explains how to output sound from Deck 1 (left) as an
example.
1 Set the positions of the knobs as shown below.
Names of knobs, etc.
HEADPHONES MIXING knob
HEADPHONES LEVEL knob
2 Press the Headphone [CUE] button of the
channel 1.
3 Turn the [HEADPHONES LEVEL] knob.
Adjust the output level from the [PHONES] output terminal.

Closing the system

1 Close rekordbox.
2 Disconnect the USB cable from the PC/Mac.
Position
Center positon
Turned fully counterclockwise
En
13

Hide quick links:

Advertisement

loading