Setup Serato software The Pioneer DJ DDJ-REV1 is a “Serato DJ Lite hardware unlocked” device, meaning it works with Serato DJ Lite out of the box. It is also a “paid upgrade to Serato DJ Pro device”, meaning it requires the purchase & activation of a Serato DJ Pro license, in order to be used with Serato DJ Pro.
Page 3
Overview 6 7 8 9 10 11 12 13 14 DDJ-REV1 FUNCTION SHIFT CONTROL FUNCTION HEADPHONE LEVEL Adjust headphone output level AUTO LOOP Enable/disable 4 beat loop Jumps playhead to start of and enables current or last active loop or press again to exit active loop 1/2X - 2X Half active loop length / Double active loop length Set or Edit Loop in point / Set or Edit...
Performance Pads The Pioneer DJ DDJ-REV1 comes with 8 performance pads, that can be used across 8 different performance pad modes. The modes consist of: HOT CUE mode: Pads 1-8 trigger Serato DJ Pro Cue points, and if no Cue point is present on that slot/ pad, pressing that pad will set a Cue point.
Page 5
DJ-FX The DJ-FX in Serato DJ Pro are powered by iZotope™. Click the FX button to open the FX panel. Select either 1, 2, or M to assign the selected effect bank to a deck or the master output. There are two available modes with DJ-FX. Single FX Mode allows you to select one effect per FX bank, and has multiple parameters that can be adjusted.
Help Show Tooltips Click on the button in the upper right-hand corner of Serato DJ Pro, then to enable tooltips. Tool tips provide a handy way to learn the various features of Serato DJ Pro. Move the mouse over a section of the screen to bring up a context sensitive tool tip. Watch Tutorials Click on the button in the upper right-hand corner of Serato DJ Pro, then...