(3) Connection of 2-step PK pedal
❷
❶
Loosen cable clip band ❸ . Bind and secure the foot pedal switch cable with the by clip band ❸ ,
4)
DANGER :
It is very important to carefully connect the cables to the correct connectors on the PWB. Wrong
connection poses a great risk.
J26 White
J18 White
-
Loosen the four setscrews ❷ in the control
1)
box to remove cover ❶ .
2)
Remove the standard pedal cords from J18
and J26 connectors on the MAIN circuit
board.
3)
Put the cord of PK 2-pedal unit in the elec-
trical box and connect it to 2-pedal unit cord
asm.. Then, connect it to J26 on the main
PCB.
2-step PK pedal : Part No M85905130AA
2-step pedal connecting cord asm. :
-
57
❸
Part No. M90315800A0