JUKI LK-1910 Instruction Manual page 24

❸
After the completion of input of a comment, the screen is returned to the previous screen by press-
ing RETURN key
(5) Completing the setting
 ❷
* When READY key
* When READY key
be changed.
* Check the pattern number before use. If you press READY key
displayed, error display E010 will be shown on the screen. At this time, re-set the pattern number.
If you turn the power OFF without pressing READY key
number, XY scale and the maximum sewing speed will not be saved.
❻ ❼
❾
❾ .
❷ is pressed, the set values of pattern No., X/Y scale, etc. are memorized.
❷ is pressed, SET READY LED  goes out. Setting of each item can
－
22
On the comment input screen, as many as 14
characters can be input
The characters that can be input are alphabets,
numbers and symbols.
Press ITEM SELECT key
input position. Press DATA CHANGE key
❼ to select the characters to be entered.
When you press RESET key
acter at the current input position is erased. When
you keep RESET key
characters which have been input are erased.
Press READY key
The work clamp moves. Then, SET READY LED
 lights up after the work clamp has gone up to
enable sewing.
When the presser is raised, be careful
that fingers are not caught in the press-
er since the presser moves after having
lowered.
❷ with pattern number 0
❷ , settings for the pattern
－
❻ to specify the
❸ , the char-
❸ held pressed, all
❷ .