JUKI LK-1910 Instruction Manual page 28

(2) For winding a bobbin only
 ❷
 ❷ ❸
❻
1) Press READY key
READY LED  .
2) Press work PRESSER and WINDER key
clamp.
3) Press ▼ key
screen is displayed.
❺
4) When you depress the pedal, the sewing ma-
chine starts rotating.
5) Depress the pedal switch again or press
RESET key
chine.
6) Press READY key
❾
key
screen.
－ －
26
❺ and select lowering of the work
Selection cannot be performed when the
SET READY LED is lit up.
❻ . The bobbin winding
❸ to stop the sewing ma-
❾ to exit from the bobbin winding
Bobbin winder does not work immediately
after turning ON the power. Perform the
bobbin winding after setting pattern No.
or the like once, pressing the READY key
❷ , and making the SET READY
LED  light up.
❷ to turn off SET
❷ and RETURN