JUKI LK-1910 Instruction Manual page 44

(2) How to use the communication function
This sewing machine is capable of inputting/outputting data by means of an USB thumb drive.
Name of data
Vector form data
A
B C
❷
❻ ❼
❽
❹
Extension
VD00 ××× .VDT
(×××:001 to 999)
❻ ❼
❼
❻
－
42
1) Entering the communication mode
Press MODE key
mode screen. Put the pattern copy in the se-
lected state with ITEM SELECT key
Then, press EDIT key
2) Selecting the type of communication
Press DATA CHANGE key
the type of communication.
Description of data
Data on needle entry points created with the PM-
1. The data form is commonly used among JUKI
sewing machine.(User pattern)
3) Selecting the communication direction
Press ITEM SELECT key
pictograph A which shows the communication
direction selection.
Press DATA CHANGE key
the communication direction.
: Data shown on the operation panel is
written on the USB thumb drive.
: Data stored on the USB thumb drive is
read into the operation panel.
4) Selecting the number
Press ITEM SELECT key
No. B to be read.
Press DATA CHANGE key
file No. C to be written. Press set READY key
❷ to write the data in file No. C.
－
❹ to display the
❻ .
❽ .
❼ to select
❻ to display
❼ to select
❻ to select file
❼ to select