JUKI LK-1910 Instruction Manual page 42

6) Erasing the pattern
In the case of erasing the pattern, select ITEM SELECT key
you want to delete. Press DATA CHANGE key
❷ . The delete confirmation screen is displayed. The pattern is deleted by pressing RE-
key
❸ on this screen.
SET key
* The standard pattern cannot be deleted.
* In the case of copying the direct pattern, select "06 Direct pattern copy" on the mode screen. In
the case of copying the cycle pattern, select "07 Cycle pattern copy" on the mode screen. Both the
direct pattern and the cycle pattern can be copied in the similar procedure.
❷ ❸
❼ to select Trash
❻
* The pattern key and the cycle pattern can be
copied in the similar procedure. To create a
new cycle pattern, press ITEM SELECT key
❻
❼
* To select a copied user pattern, press ITEM
SELECT key
the pattern number is displayed on the upper
left section of the screen. Then, press DATA
CHANGE key
number.
－ －
40
❻ to select the pattern number
. Then, press READY
❻ to select new creation
❻ to display
❼ to select a pattern
.
when