JUKI LK-1910 Instruction Manual page 55

No.
U051 Wiper control can be prohibited
: Wiper output prohibited
: Wiper output enabled
Thread breakage detection selection
U071
: Prohibited
U072 Number of invalid stitches at the start of sewing of
thread breakage detection
U073 Number of invalid stitches during sewing of thread
breakage detection
U074 The fan operation can be set
: Energy saving mode
: Constantly operates
U075 With/without air pressure detection
: Without
U105 Intermediate presser : wiper sweeping position
: Upper wiping
* Displayed only for the LK-1920
U129 With/without needle cooler control
: Without
U132 Selection of the tension controller No. 3 mode
: Inversion shaft
: Tension controller No. 3
U133 Selection of the return-to-origin route for the inversion pattern
: Reverse trace prohibited
: Reverse trace enabled
U134 With/without disc floating device control
: Without
Function
: Enabled
: With
: Lower wiping
: With
: With
－
Setting range
-
-
0 to 15
0 to 15
-
-
-
-
-
-
-
－
53
State when
Remarks
delivered
8
3
For the LK-1910A
and LK-1920A, the air
presser detection can
be set to
When the inversion pat-
tern is used, the inver-
sion-specific operation
is prohibited by means
of the inversion output.
.