6. Set Button
6.1 Setting the Printer Defaults
1. The current printer defaults maybe seen by preforming a Printer Self-Test, see section
6.2 for information.
2. A utility program is used to update the firm-ware. The program is available by calling
OMNIPrint customer support. 1-949-833-0080
3. Turn the printer off.
4. Connect the printer to a computer with the utility program loaded and open.
5. While pressing the Paper Feed and Set buttons simultaneously turn the printer on.
Immediately release the Paper Feed and Set buttons.
6. The printer is now ready to update the firmware using the Utility program.
Rev.
Document No.: 19B00293
1.0
OM5200 Technical Manual
Date: March 6, 2018
Page: 14
Need help?
Do you have a question about the OM5200 and is the answer not in the manual?