1 DRO description
1.1 Front plate:
Keys to open
droplist buttons of the
FUNCTION BAR
1.2 Turning the unit on and off
It turns on automatically when applying voltage or after pressing the on/off key.
On power-up, an initial screen comes up for a few seconds and then the work screen is displayed.
Turns the DRO on or off.
* Select axes
* Delete axis.
* Preset
TFT screen
Toggle between Z, Z1 and Z2
in lathe mode with 3 axes.
Power indicator
LED
Keys for
entering numeric values
Cursor keys.
Tool compensation on /off.
Power-off button
40i- Operation/Installation - DRO description - (3/40)
Validate or
access to SET
* Abort an
operation
already initiated.
* Delete axis.