EXP-1003 HD
Truck Test Results
The tester displays the complete results on multiple screens.
To view the code, press or . The tester will generate a test
code for all REPLACE decisions.
To send the results to the IR printer, align the analyzer's IR
transmitter with the printer's receiver, and press PRINT. To
return to the Main Menu, press END.
NOTE: For REPLACE or BAD CELL decisions, enter the
battery serial number located on the battery case to
generate a test code for warranty purposes. When
finished, press NEXT to continue.
Pack
Decision
Batteries
In Pack
www.midtronics.com
Truck Test Decisions
Decision
GOOD
BATTERY
GOOD–
RECHARGE
CHARGE &
RETEST
REPLACE
BATTERY
BAD CELL–
REPLACE
Selected
rating
Battery
temperature
Vehicle ID
Battery Pack Test Results
The tester displays the complete results on multiple screens.
Press or to view each screen.
To send the results to the IR printer, align the analyzer's IR
transmitter with the printer's receiver, and press PRINT. To
continue with the System Test, press NEXT.
Results:
Battery 1
Battery Pack Decisions
Decision
GOOD PACK Return the battery pack to service.
CHECK
Results:
BATTERY
Battery 2
PACK
24-VOLT
PACK
17
Recommended Action
Return the battery to service.
Fully charge the battery and return it to
service.
Fully charge the battery and retest. Failure
to fully charge the battery before retesting
may cause false readings. If CHARGE &
RETEST appears again, replace the battery.
May also mean a poor connection between
the battery and the vehicle.
This decision indicates a bad cell within the
battery. Replace the battery.
Risk of explosive gases.
Can cause death or
serious personal injury.
Never attempt to charge a
battery with a bad cell. The
battery must be replaced.
Recommended Action
Break the battery pack apart and test each
battery individually.
The system being tested in-vehicle is a 24-volt
system. Disconnect the batteries and test
them individually.
Midtronics Inc.
7000 Monroe Street
Chapter 3: System Test
Willowbrook, IL 60527