Audio Board - HP OMEN Maintenance And Service Manual

Audio board

Description
Audio board
Before removing the audio board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the any smart cards and memory cards.
5. Remove the base enclosure (see
6. Remove the battery (see
7. Remove the hard drive (see
8. Remove the SSD (see
9. Remove the left fan (see
Remove the audio board:
1. Disconnect the audio board cable (1) from the connector on the system board.
2. Remove the audio board from the computer (2).
Reverse this procedure to install the audio board.
Base enclosure on page
Battery on page 46).
Hard drive (HDD) on page
Solid-state drive (SSD) on page
Fans on page 49).
35).
38).
40).
Component replacement procedures
Spare part number
L24346-001
53