Remote Control Installation; Remote Control Box Location - TOHATSU BFT 60A Owner's Manual

Remote Control Installation

Improperly installed steering
system, remote control box, and
remote control cable, or installing
those of the different types could
cause unpredictable accident.
Consult an authorized TOHATSU
outboard motor dealer for proper
installation.
The control box is available in three
types.
Select the most suitable control box
for your outboard motor considering
the installation position,
operationability, etc. of the control
box.
See an authorized TOHATSU
outboard motor dealer for further
information.
SIDE-MOUNT TYPE REMOTE
CONTROL BOX
(equipped type or optional
equipment)
INSTALLATION
<Remote Control Box Location>
REMOTE
CONTROL
LEVER
REMOTE
CONTROL BOX
Install the remote control box in the
position where is easy to operate the
remote control lever and switches. Be
sure that there are no obstacles on the
route of the control cable.
The control box position of the other
types should be determined in the
same manner.
REMOTE
CONTROL
CABLE
53