Neutral Release Lever; Engine Switch (Ignition Switch) - TOHATSU BFT 60A Owner's Manual

Neutral Release Lever

REMOTE CONTROL LEVER
NEUTRAL
RELEASE LEVER
The neutral release lever is set on the
remote control lever to prevent an
accidental operation of the remote
control lever.
The remote control lever does not
operate unless it is moved while
pulling the neutral release lever up.
CONTROLS AND FEATURES (R type)

Engine Switch (Ignition Switch)

ON
OFF
This remote control is equipped with
an automotive type engine switch.
On the side-mount type, the engine
switch locates on your side near the
remote control box.
Key positions:
START: to start the engine.
ON: to run the engine after
starting.
OFF: to stop the engine
(IGNITION OFF).
Do not leave the engine switch
START
(ignition switch) ON (key in ON
position) when the engine is not
ENGINE
running as the battery will
SWITCH
discharge.
The starter motor will not work
unless the remote control lever is in
the NEUTRAL position, and the clip
is in the emergency stop switch.
27