Trimming The Outboard Motor - TOHATSU BFT 60A Owner's Manual

Trimming the Outboard Motor

60°
12°
16°
TILT –
4°
ANGLE
0°
(VERTICAL LINE)
(when transom angle is 12°)
The BFT60A/BFW60A models are
equipped with the power trim/tilt
system which can adjust the outboard
motor angle (trim/tilt angle) while
cruising and mooring. The outboard
motor angle can also be adjusted
while cruising and accelerating to
obtain the maximum speed and
optimum driveability and fuel
economy.
(H type)
Press DN to
lower bow.
Press UP to
raise bow.
TRIM
POWER TRIM/TILT SWITCH
ANGLE
Press either UP or DN (down) of the
power trim/tilt switch and tilt the
outboard motor to the best position in
compliance with the cruising
conditions.
OPERATION
(Side-mount type)
POWER TRIM/TILT SWITCH
Press UP to
raise bow.
Press DN to
lower bow.
REMOTE CONTROL LEVER
89