Battery - TOHATSU BFT 60A Owner's Manual

MAINTENANCE
8. Thread the plugs in by hand to
prevent cross threading.
9. After the spark plugs are seated,
tighten with a spark plug wrench
and 10 mm box wrench to
compress the washers.
SPARK PLUG TORQUE:
16 N·m (1.6 kgf·m , 12 lbf·ft)
118
If installing new spark plugs, tighten
1/2 turn after the spark plugs seat to
compress the washers.
If reinstalling used spark plugs,
tighten 1/8–1/4 turn after the spark
plugs seat to compress the washers.
The spark plugs must be securely
tightened. An improperly tightened
plug can become very hot and may
cause engine damage.
10. Attach the spark plug caps.
11. Install and lock the engine cover
securely.

Battery

Battery handling differs according
to the type of the battery and the
instructions described below might
not be applicable to the battery of
your outboard. Refer to the battery
manufacturer's instructions.
Batteries produce explosive gases:
If ignited, an explosion can cause
serious injury or blindness. Provide
adequate ventilation when
charging.
• CHEMICAL HAZARD: Battery
electrolyte contains sulfuric acid.
Contact with eyes or skin, even
through clothing, may cause
severe burns.
Wear a faceshield and protective
clothing.